日本不卡一区,亚洲男同帅gay片在线观看,6080YYY午夜理论AA片,丝袜 亚洲 另类 欧美 变态

en CN

Product Details

Specific indicators are as follows:

Model Code

Fixed Carbon (minimum)

Sulphur (highest)

Ash Content (highest)

Volatile matter (maximum)

Moisture (maximum)

Particle size (90%)

Nitrogen content (maximum)

DT-CA-02

98.50%

0.50%

0.70%

0.80%

0.50%

1-5MM

N/A

DT-CA-06

99.00%

0.30%

0.50%

0.50%

0.50%

1-5MM

0.10%

DT-CA-09

98.50%

0.05%

0.80%

0.70%

0.50%

0.5-5MM

0.03%

DT-CA-08

97.00%

0.07%

1.50%

1.50%

0.50%

0.2-1MM

0.03%

DT-CA-11

99.00%

0.03%

0.50%

0.50%

0.50%

0.5-5MM

0.03%

DT-CA-12

80.00%

0.10%

16.50%

3.50%

2.00%

1-5mm

N/A


By using the Duratight Brand Carbon Additive,the amount of scrap steel can be increased greatly, and the amount of pig iron can be reduced or no pig iron can be used. The carburant is characterized by good absorption of carbon in molten iron and no return of slag. The production cost of castings can be greatly reduced by using the carburant.


1. USAGE: used for special steel making and ductile iron casting.


2. Product features: High fixed carbon content, low sulfur content, stable carburizing effect, high carbon absorption rate.


3. SCOPE OF APPLICATION: It is used for carbonizing cast steel and cast iron in various electric furnaces.


4. GRANULARITY: Commonly used granularity: 0.2-1mm 1-5mm, 1-3mm, 3-5mm, 3-8mm, 5-10mm or according to the special requirements of users.


5. How to use:

1) .The use of more than 5 tons of electric furnace, a single stable raw material, we recommend the method of decentralized addition. According to the requirement of carbon content, the carbon additive and the metal charge are added into the middle and lower part of the electric furnace together with each batch. Carbon Additive in the melting do not slag, or easy to wrap in waste slag, affect carbon absorption. 2) . Using about 3 tons medium frequency induction furnace, the raw material is single and stable, we recommend the method of centralized adding. When a small amount of molten iron is melted or left in the furnace, the carbon additive should be added to the surface of the molten iron once, and the metal charge should be added immediately, and the carbon additive should be pressed into the molten iron to make the carburizing agent in full contact with the molten iron. 3) . Using small medium frequency electric furnace, raw material clip has pig iron and other high carbon material, we recommend carbon additive fine adjustment. After Molten steel/molten iron, the carbon content can be adjusted and added to the surface of the steel/molten iron. The product can be dissolved and absorbed by Eddy current or manual stirring of the steel/molten iron during melting in an electric furnace.


6. Compared with the traditional pig iron:

1) this product is non-metal, melting point is about 1200-1300 degrees, no residue in use, high utilization. 2) the product is easy to produce and use, the consumption is much lower than pig iron, and the production cost of the enterprise is saved. 3) the phosphorus and sulfur content of this product is much lower than pig iron, and its performance is stable.

Professional domestic and foreign distribution and transportation experience and partners, professional foreign trade operators, to ensure that your cargo transportation worry-free. DOMESTIC MODE OF TRANSPORT: Motor Transport, Railway Transport, sea transport; foreign mode of Transport: Railway Transport, sea transport, air transport, can do FOB, CFR, CIF, Ddu, Ddu, DDP under the terms of transport. Rich experience in packing and packaging, so that you do not need to worry about transportation.


1. Waterproof ton bag packing, ton bag packing (no small bag)

2. Paper bags, 20kg or 25kg paper bags, plus ton bags or pallets

3. 20kg, 25kg bags, 30kg waterproof woven bags, plus ton bags or pallets

In addition to the above packing methods, if you have special requirements for packing, please contact the durable works department.


Graphite is widely used in various fields, as professional supplier, we will recommend and supply the most suitable grade for different fields. in addition, Duratight owns different Surface Treatments to meet special requirements. Welcome you to share your exact demand to our team.

Inquire Now

If you have any questions or needs about the product, please fill in the following form and we will contact you as soon as possible.

0086-532-80679022